- Oscilloscopes[10]
- Industrial Power Supply[4]
- Switching Power Supply[3]
- Speed Measuring Instruments[10]
- Other Electronic Measuring Instruments[10]
- Signal Generators[10]
- Temperature Instruments[7]
- Hand Tool Sets[7]
- Moisture Meters[7]
- Other Measuring & Analysing Instruments[2]
- Other Machinery[2]
- Other Welding & Soldering Supplies[1]
- Other Electrical Equipment[10]
- Clamp Meters[9]
- Multimeters[8]
- Power Meters[8]
- Battery Testers[1]
- Resistance Meters[3]
- Resistors[1]
- Testing Equipment[3]
- Spectrum Analyzers[5]
- Other Analysis Instruments[2]
- Contact Person : Ms. Li Kaixuan
- Company Name : Shenzhen Meiruike Electronic Technology Co., Ltd.
- Tel : 86-755-83324500
- Fax : 86-755-82736668
- Address : Guangdong,Shenzhen,Rm1202,A-unit,Baohua Building,Huaqiang North Road,Shenzhen-518000,China
- Country/Region : China
- Zip : 518000
GWinstek GDS-1022 Digital Oscilloscope(25MHz,2CH)
GWinstek GDS-1022 Digital Oscilloscope(25MHz,2CH)
Features
100/60/40/25 MHz Bandwidth 2 Input Channels 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling 4k Memory Length per Channel Peak Detect as Fast as 10ns Save/Recall of 15 Front Panel Settings & Waveforms 5.6" TFT Color Display 19 Auto Measurements Arithmetic Operators - Add, Subtract, FFT Timebase Range: 1nS ~ 10nS/div USB Port for PC Connection 6-Digit Real-Time Frequency Counter SD Card Supported
| GDS-1022 | GDS-1042 | GDS-1062 | GDS-1102 |
VERTICAL | ||||
Channels | 2 | 2 | 2 | 2 |
Bandwidth | DC ~ 25MHz (-3dB) | DC ~ 40MHz (-3dB) | DC ~ 60MHz (-3dB) | DC ~ 100MHz (-3dB) |
Rise Time | <14ns Approx. | <8.7ns Approx. | <5.8ns Approx. | <3.5ns Approx. |
Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) | |||
Accuracy | ±(3% x |Readout|+0.1 div + 1mV) | |||
Input Coupling | AC, DC & Ground | |||
Input Impedance | 1M±2%, ~16pF | |||
Polarity | Normal & Invert | |||
Maximum Input | 300V (DC+AC peak), CATII | |||
Waveform Signal Process | + , - , FFT | |||
Offset Range | 2mV/div ~ 50mV/div : ±0.4V 100mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V | |||
Bandwidth Limit | 20MHz (-3dB) | |||
TRIGGER | ||||
Sources | CH1 , CH2 , Line , EXT | |||
Modes | Auto, Normal, Single, TV, Edge, Pulse Width | |||
Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | |||
Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV25MHz ~ 100MHz: Approx. 1.5div or 15mV | |||
EXT TRIGGER | ||||
Range | ±15V | |||
Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV | |||
Input Impedance | 1MΩ±2% , ~ 16pF | |||
Maximum Input | 300V (DC AC peak) , CATII | |||
HORIZONTAL | ||||
Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div | |||
Modes | Main, Window, Window Zoom, Roll, X-Y | |||
Accuracy | ±0.01% | |||
Pre-Trigger | 10 div maximum | |||
Post-Trigger | 1000 div | |||
X-Y MODE | ||||
X-Axis Input | CH1 | |||
Y-Axis Input | CH 2 | |||
Phase Shift | ±3° at 100kHz | |||
SIGNAL ACQUISITION | ||||
Real-Time Sample Rate | 250MSa/s maximum | |||
Equivalent Sample Rate | 25GSa/s maximum | |||
Vertical Resolution | 8 Bits | |||
Record Length | 4K Dots maximum | |||
Acquisition Mode | Normal, Peak Detect, Average | |||
Peak Detection | 10ns (500ns/div ~ 10s/div) | |||
Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | |||
CONTROL PANEL FUNCTION | ||||
Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level | |||
Save Setup | Up to 15 sets of measurement conditions | |||
Save Waveform | 15 sets of waveform | |||
INTERFACE | ||||
USB Slave Connector | USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) | |||
SD Card Slot | Image (BMP), waveform data (CSV), and setup (SET) | |||
GWinstek GDS-1022 Digital Oscilloscope(25MHz,2CH)
